RSSAll Entries in the "Vehicles" Category

Technical Bulletin: Ford Utility Carbon Monoxide Info

Technical Bulletin: Ford Utility Carbon Monoxide Info
With so much information floating around surrounding the concerns customers are having with the Ford Utility Interceptor we have put together this single bulletin to try to put all existing information into one location for your review. Based on this information you and your department and upfitting resource can decide to take the needed actions to ensure your drivers are safe and your fleet concerns are mitigated.

The following links are to all known information resources we have knowledge of at this time:

From the feedback we have seen in the field the issue does clearly exist in some cases. In other cases the issues being seen are a mix of multiple issues that all need to be resolved and might or might not be specific to only one vehicle concern. Both mechanical and equipment installation related issues have been found

While we have seen and inspected vehicles for carbon monoxide concerns and proper equipment sealing, we have also found those vehicles to be in various states of overall disrepair mechanically. The key is to rule out all issues in your fleet and making your users aware of these concerns but also get them to report these types of issues to their appropriate supervisors so they can be corrected.

As a service to our customers in the Northern CA region we have decided to offer a free inspection service for any vehicles we have worked on or any vehicles you might have a concern about that are affected by this specific issue. This vehicle inspection service can normally be performed while you wait. But in some cases based on equipment installed the vehicle would need to be left at our facility. This service is an inspection only and diagnosis of install practices for information to the fleet manager. The fixes Ford are proposing include changes to the air handling system in the vehicle and other fixes we might not be aware of and thus will not be able to perform. This service would not replace the need to allow Ford to perform those fixes that all Utility Interceptors affected might need to have completed. These inspections are by appointment only, contact information is below.

Please understand the safety of all of our customers is extremely important to us and all users of the Utility Interceptor should understand and utilize the resources above to address any concerns with their fleet in a timely manner. 

If we can be of any assistance please let us know. service@wattco.net

WATTCO

Brent Burzycki – General Manager
707-435-9233 – service@wattco.net
www.wattco.net

Safety Alert–For Immediate Release

Safety Alert–For Immediate Release

Please do a close inspection of any of your late model Freightliners for these front suspension issues.

This was found on a LACoFD Crew Carrier last week during their quarterly inspection.  Issue was not there 90 days ago. 

2008 Freightliner Front Steer Axle Suspension
Meritor model number: MFS-12-143A  12,000 lb.
Serial number: ARD00337731

F1943__2F1943__1

Fire Truck Maintenance Tips to Ensure Safety and Save Money

Reprint of article on www.fdnntv.com

 

Fire truck maintenance is an essential part of every fire department’s routine and budget.  However, with the nation facing an economic downturn, fire department officials are looking for ways to save money.  FDNNTV.com’s Barbara Brooks and veteran fire department Maintenance Officer Sammy Dominick, Sr. bring you tips on daily fire truck maintenance practices that can help your department save money and keep your vehicles  in optimum working condition.

Fire Truck Maintenance That Can Be Performed By Firefighters

Unless a fire department has its own full-service maintenance shop, most fire apparatus repairs must be outsourced to a third-party fire mechanic.  However, there are several things that firefighters can do on a daily and weekly basis in the station to catch problems early and to prevent the need for costly repairs. These measures will also ensure the safety of the apparatus and its crew.

Apparatus Inspection Forms

Most fire departments have an Apparatus Inspection Form that operators must fill out prior to, and in some cases after, each shift.  Sammy Dominick, Sr., a retired Rancho Cucamonga Fire District Maintenance Officer with thirty years of experience, explains, "On that form the individual is signing that he has checked all of the emergency lighting, he’s checked the brakes, he’s checked the steering, he checked the tires, wheels and all of the particulars, all of the equipment that is essential to the firefighting component.  They’ve got to check that off daily."  Inspecting all of a fire department’s apparatus on a daily basis will insure early detection of potential problems, preventing a possible accident or malfunction.  Identifying these issues right away will also prevent additional, related problems, thereby saving the fire department money.

Fire Pump Maintenance

Fire pumps should be maintained on a weekly basis.  Dominick advises that pump operators should always backflush the pump to clear out rocks and debris that might have entered the pump during the use of a fire hydrant.  He explains, "Every time a contractor breaks into the main pipe, all of that concrete, those pieces and rocks, follow through the mains, come up the hydrants, and stay at the head of the hydrant."  He suggests that firefighters make a habit of flowing the hydrant before they hook up to it with their fire apparatus to flush that debris out of the hydrant and keep it from entering the pump.  He also recommends that firefighters operate the relief valve or governor on a weekly, if not daily, basis.

"Over and Under" Checks

Keeping a fire apparatus’ moving components properly lubricated is another preventative maintenance measure that firefighters can take.  Using a creeper, personnel can access the undercarriage of the fire truck and lubricate all of its fittings.  Sammy Dominick explains that this can also be used as an opportunity to check a myriad of other components, saying, "Going under with a creeper and doing what we call an "over and under’ – over is everything on top and under is getting on the creeper, check the drive shaft, the U-Joints, look for leaks in the pump, the differential, the engine, the transmission, maybe a major water leak."

Hoses

Besides looking for damage and leaks, operators should check that all hoses are securely mounted and are not chaffing against the drive shaft or wheels.

Drive Shaft

It is also important to make sure that the drive shaft is not cracked or bent.  Apparatus operators need to be sure that the drive shaft’s couplings are securely mounted and free of foreign objects.

Brake Slack Adjustor

Inspecting a vehicle’s front brake slack adjustor is also very important.  There should not be any broken, loose or missing parts.  With the brakes released, the push rod should not travel more than one inch.

Steering Linkage

Similarly, steering linkage should not have any worn or cracked connecting links, arms or rods.  Operators should also check to make sure all of these parts are securely mounted.

Importance of Doing Daily and Weekly Fire Truck Inspections

Dominick stresses the importance of firefighters doing daily and weekly maintenance checks on the fire apparatus in their stations, saying, "Anyone that has a license to drive an apparatus should be able to maintain it to the best level they can.  Like the "Out of Service Criteria".  Is it a tire problem? Is it a brake problem? Is it a major leak problem? Is it a steering problem?  Those kinds of things, you are out of service, no question.  You take that on a public road and you get into an accident with it and you haven’t checked it, it’s on you.  The liability is on the driver."

Related Videos

Fire Trucks Cosmetic Maintenance

Fire Truck Graphics

Rancho Cucamonga Fire District Maintenance Shop

SAFETY ALERT! - 2002-10 Ford Vehicles – Steel Rims/Wheels - Unsubstantiated

SAFETY ALERT! – 2002-10 Ford Vehicles – Steel Rims/Wheels – Unsubstantiated

“Unsubstantiated” – Research is continuing by NHTSA and Ford

THIS INFORMATION SEEMS TO ONLY BE AFFECTING ONE DEPARTMENT AT THIS TIME AND THE PROBLEM DOES NOT SEEM TO BE WIDESPREAD – PLEASE USE THIS AS INFORMATION ONLY AT THIS TIME

rim 1 rim 2

SAFETY ALERT!!    IMMEDIATATE ACTION REQUIRED!!

** Submitted by a Member **

If you or any of your employees use and drive 2002 through 2010 FORD Expeditions, Explorers, Rangers, F150, F250, F350 F450, F550 with STEEL rims/wheels PLEASE take them to a Ford Dealership, reputable vehicle repair shop or tire shop and have the tires REMOVED from the wheel and the rims/wheels inspected for cracks as shown in the photos. Take the photos with you to show what you want inspected.  I say this because the failure CAN NOT be seen with the tire on the rim/wheel.

This does NOT apply to vehicles with aluminum wheels.

If you are experiencing any of the following it could be signs that you have a cracked rim, slow or fast air leak, wobble or vibrations while driving.

This is a SERIOUS issue and we need to be sure to get those vehicles checked out.
For the newer vehicles that may be still under warranty it would be best to take them to a Ford dealership to be taken care of that way.

The USFS Region 4 is starting to get reports of cracked rims/wheels, just last week the H-T had 4, new Ford trucks inspected and 3 of them had cracked rims. So this is not just an issue with older vehicles.

There is no technical bulletin or Ford recall on this issue yet, please have you vehicles inspected.

If you personally own a Ford please take the time to have it checked out also, safety awareness and risk assessment doesn’t stop when we go home.

** Please put a comment here if you have seen this issue in your fleet **